Building systems › Fire compartmentation

Fire compartmentation

EI 60, EI 90 and EI 120 partitions, linings and ceilings with fire-resistant board.

Fire resistance (EI) applies to the complete system tested by the manufacturer. It is certified on each project with the manufacturer’s classification report, supplied with our quotation.

side A48 mmside B78 mm

Partition EI 60

F15 | 48 (LV50) | F15

Typical use: Compartmentation between uses, plant rooms and escape routes.

Build-up
Side APlaco PPF 15 (fire-resistant)
Side BPlaco PPF 15 (fire-resistant)
Framing48 mm track and studs at 600 mm centres
InsulationIsover Drywall 50 mm (glass wool)
AccessoriesJoint compound and tape, self-drilling screws, anchors and perimeter sealing strip.
Total thickness: 78 mmManufacturer reference: P010F
side A48 mmside B108 mm

Partition EI 90

BA15+BA15 | 48 (LV50) | BA15+BA15

Typical use: Compartmentation between uses, plant rooms and escape routes.

Build-up
Side A2 × Placo BA 15 (standard)
Side B2 × Placo BA 15 (standard)
Framing48 mm track and studs at 600 mm centres
InsulationIsover Drywall 50 mm (glass wool)
AccessoriesJoint compound and tape, self-drilling screws, anchors and perimeter sealing strip.
Total thickness: 108 mmManufacturer reference: P127F1
side A48 mmside B100 mm

Partition EI 120

F13+F13 | 48 (LV50) | F13+F13

Typical use: Compartmentation between uses, plant rooms and escape routes.

Build-up
Side A2 × Placo PPF 13 (fire-resistant)
Side B2 × Placo PPF 13 (fire-resistant)
Framing48 mm track and studs at 600 mm centres
InsulationIsover Drywall 50 mm (glass wool)
AccessoriesJoint compound and tape, self-drilling screws, anchors and perimeter sealing strip.
Total thickness: 100 mmManufacturer reference: P052F
wall48 mmboard78 mm

Wall lining EI 60

48 (LV50) | F15+F15

Typical use: Fire protection of separating walls.

Build-up
Boards2 × Placo PPF 15 (fire-resistant)
Framing48 mm track and studs at 400 mm centres
InsulationIsover Drywall 50 mm (glass wool)
AccessoriesJoint compound and tape, self-drilling screws, anchors and perimeter sealing strip.
Total thickness: 78 mmManufacturer reference: UPLC-T031
wall48 mmboard93 mm

Wall lining EI 90

48 (LV50) | F15+F15+F15

Typical use: Fire protection of separating walls.

Build-up
Boards3 × Placo PPF 15 (fire-resistant)
Framing48 mm track and studs at 400 mm centres
InsulationIsover Drywall 50 mm (glass wool)
AccessoriesJoint compound and tape, self-drilling screws, anchors and perimeter sealing strip.
Total thickness: 93 mmManufacturer reference: UPLC-T035
wall48 mmboard98 mm

Wall lining EI 120

48 (LV50) | F25+F25

Typical use: Fire protection of separating walls.

Build-up
Boards2 × Megaplac PPF 25 (fire-resistant)
Framing48 mm track and studs at 450 mm centres
InsulationIsover Drywall 50 mm (glass wool)
AccessoriesJoint compound and tape, self-drilling screws, anchors and perimeter sealing strip.
Total thickness: 98 mmManufacturer reference: UPLC-T041
slabF-530hangerwoolboards

Ceiling EI 60

F15+F15 | F-530 (LV50)

Typical use: Floor slab protection and horizontal compartmentation.

Build-up
Boards2 × Placo PPF 15 (fire-resistant)
FramingF-530 furring channel on hangers and rods
InsulationIsover Drywall 50 mm (glass wool)
AccessoriesJoint compound and tape, screws, M6 threaded rod with anchor and nut, suspension clips.
Manufacturer reference: UPLC-H005
slabF-530hangerwoolboards

Ceiling EI 90

F15+F15+F15 | F-530 (LV65)

Typical use: Floor slab protection and horizontal compartmentation.

Build-up
Boards3 × Placo PPF 15 (fire-resistant)
FramingF-530 furring channel on hangers and rods
Insulationglass wool 65 mm
AccessoriesJoint compound and tape, screws, M6 threaded rod with anchor and nut, suspension clips.
Manufacturer reference: UPLC-H006
slabF-530hangerwoolboards

Ceiling EI 120

F25+F25 | F-530 (LV65)

Typical use: Floor slab protection and horizontal compartmentation.

Build-up
Boards2 × Megaplac PPF 25 (fire-resistant)
FramingF-530 furring channel on hangers and rods
Insulationglass wool 65 mm
AccessoriesJoint compound and tape, screws, M6 threaded rod with anchor and nut, suspension clips.
Manufacturer reference: UPLC-H008

Indicative section drawings. Final build-up, stud spacing and maximum height are adjusted to each project and to the manufacturer’s documentation.

Attach your drawings or bills of quantitiesTechnical quotation within 72 hours (PDF, BC3 or Excel).
WhatsApp