Building systems › Partitions
Interior and separating walls: single frame, double board, H studs or twin frame.
Typical use: Interior layout in housing, offices and retail.
| Side A | Placo BA 13 (standard) |
|---|---|
| Side B | Placo BA 13 (standard) |
| Framing | 48 mm track and studs at 600 mm centres |
| Insulation | Isover Drywall 50 mm (glass wool) |
| Accessories | Joint compound and tape, self-drilling screws, anchors and perimeter sealing strip. |
Typical use: Greater heights and stiffness, e.g. in public buildings.
| Side A | Placo BA 15 (standard) |
|---|---|
| Side B | Placo BA 15 (standard) |
| Framing | 70 mm track and studs at 600 mm centres |
| Insulation | Rockwool Sonorock 60 mm (rock wool) |
| Accessories | Joint compound and tape, self-drilling screws, anchors and perimeter sealing strip. |
Typical use: Separating walls between dwellings, classrooms or offices. Higher sound insulation.
| Side A | 2 × Placo BA 13 (standard) |
|---|---|
| Side B | 2 × Placo BA 13 (standard) |
| Framing | 48 mm track and studs at 600 mm centres |
| Insulation | Isover Drywall 50 mm (glass wool) |
| Accessories | Joint compound and tape, self-drilling screws, anchors and perimeter sealing strip. |
Typical use: Separating walls between dwellings, classrooms or offices. Higher sound insulation.
| Side A | 2 × Placo BA 13 (standard) |
|---|---|
| Side B | 2 × Placo BA 13 (standard) |
| Framing | 70 mm track and studs at 600 mm centres |
| Insulation | Rockwool Sonorock 60 mm (rock wool) |
| Accessories | Joint compound and tape, self-drilling screws, anchors and perimeter sealing strip. |
Typical use: Bathrooms, kitchens and wet rooms (moisture-resistant side facing the wet area).
| Side A | Placo PPM 13 (moisture-resistant) |
|---|---|
| Side B | Placo BA 13 (standard) |
| Framing | 70 mm track and studs at 600 mm centres |
| Insulation | Rockwool Sonorock 60 mm (rock wool) |
| Accessories | Joint compound and tape, self-drilling screws, anchors and perimeter sealing strip. |
Typical use: Hospitals, hotels, schools and noise-sensitive rooms.
| Side A | Placophonique PPH 13 (acoustic) + Placo BA 13 (standard) |
|---|---|
| Side B | Placophonique PPH 13 (acoustic) + Placo BA 13 (standard) |
| Framing | 70 mm track and studs at 600 mm centres |
| Insulation | Rockwool Sonorock 60 mm (rock wool) |
| Accessories | Joint compound and tape, self-drilling screws, anchors and perimeter sealing strip. |
Typical use: Greater heights and stiffness, e.g. in public buildings.
| Side A | 2 × Placo BA 13 (standard) |
|---|---|
| Side B | 2 × Placo BA 13 (standard) |
| Framing | 48 mm track, back-to-back (H) studs at 600 mm |
| Insulation | Isover Drywall 50 mm (glass wool) |
| Accessories | Joint compound and tape, self-drilling screws, anchors and perimeter sealing strip. |
Typical use: Between different uses or for the highest acoustic demand; allows services in the cavity.
| Side A | 2 × Placo BA 13 (standard) |
|---|---|
| Side B | 2 × Placo BA 13 (standard) |
| Framing | Twin 48 mm stud frames, independent |
| Insulation | 2 × Isover Drywall 50 mm (glass wool) |
| Accessories | Joint compound and tape, self-drilling screws, anchors and perimeter sealing strip. |
Indicative section drawings. Final build-up, stud spacing and maximum height are adjusted to each project and to the manufacturer’s documentation.
